Mountain Buggy/ Phil&Teds 12" Inner tubes

Compatible with Urban Jungle, Terrain, +One and Duo strollers.

Installation steps:

• Deflate the existing tube, remove the tube and the outer tire
• Install your new tube on the tire
• Inflate your tube with a hand pump (20psi maximum)

Mountain Buggy recommends using a maximum air pressure in all wheels at all times. It can be slightly lower but never higher than 20psi. If the pressure is higher, the tubes may implode or deflate. If your tires are underinflated they cancompress to the rim and bind. Under-inflated tires also make your travel more difficult and lead to faster tire wear .

To maintain proper pressure, it is recommended that you use a hand pump or a foot pump with a tire gauge so that you know how much air pressure you are putting in the reservoir. We only recommend using a hand or bicycle pump, as an air compressor may fill the tube too quickly.

Also compatible with Phil&Teds strollers:

• E3 V1/V2/Twin
• Classic & Legacy Red Classic/ Classic Twin
• Sport V1/V2
• Dash
• Explorer
• Hammerhead (rear wheels)
• Navigator
• Verve (rear wheels)
• Vibe